Oase PondoVac 5 Pond Vacuum 2100 GPH Continuous Discharge
Found It for the Same Price or Less?
Contact us and we'll beat it. Guaranteed!
Contact us and we'll beat it. Guaranteed!
Tired of a pond vacuum that fills up and forces you to stop every few minutes to empty the tank? The PondoVac 5 keeps working while you work. Its twin-pump design vacuums debris and drains dirty water at the same time, so you can pull silt, leaves, and muck from the bottom of your pond in one uninterrupted pass. With a powerful motor, deep suction reach, and quiet Big Wheel mobility, this is muck-busting made simple.

Most vacuums make you stop, empty, and start over. The PondoVac 5 skips that hassle entirely thanks to its two-pump system.
The result is one continuous cycle of suction and discharge that keeps you moving instead of babysitting a full tank.

Bigger debris stays in the tank instead of clogging your pump or the discharge line.
A strong 1700 W motor with optimised blade geometry drives the PondoVac 5 to a maximum suction depth of 2.50 m. Depending on your conditions of use, it moves up to 8000 l/h of water and waste, so even a deep or heavily silted pond gets cleared out. Because it also pumps waste water across different heights, it handles difficult terrain where a gravity drain simply will not work.
Full power is not always what you want, especially in shallow water. The hand-held regulator puts control right at your fingertips.
Moving a full vacuum around the garden should not feel like a workout. The Big Wheel design makes it easy.

On the pressure side, a plastic C-connection locks the discharge hose in place for a reliable, sealed fit. The drain hose has a C-connection on both sides, so getting waste water away is quick and secure. Drain away any amount of dirty water and send it exactly where you want it.
The PondoVac 5 is not just for garden ponds. Put it to work on:
The transparent suction tube lets you keep an eye on the flow at all times, so you always know what is passing through. A floating hose set with 10 metres of hose (38 mm) and a matching telescopic pole are optionally available.
When your pond floor is layered with sludge, you need suction that pulls it up and drainage that keeps up. This machine pairs continuous discharge with strong pumping to move thick, silty waste water without stalling. Add its ability to lift waste over height differences and you have a tool ready for the messiest cleanup your pond can throw at it.
| SKU | 48080 |
|---|---|
| Dimensions (L × W × H) | 17.2 × 16.7 × 28.2 in. / 436 × 425 × 716 mm |
| Net weight | 54.010 lbs. |
| Power consumption | 2400 W |
| Power consumption pump | 900 W |
| Power cable length | 24.6 ft. / 7.50 m |
| Max. gallons per hour | 2113 gal/h |
| Max. flow rate | 8000 l/h |
| Suction depth max. | 2.50 m |
| Max. suction head | 8.2 ft. |
| Suction hose length | 16.4 ft. / 5.00 m |
| Drain hose length | 26.3 ft. / 8.00 m |
| Floating hose application | 38 mm |
| Limited Warranty | 2 + 1 Years |