Matala Power-Cyclone Pond Vacuum 1500 GPH with 13 Gallon Tank

Take On Big Pond Jobs With the Matala Power-Cyclone

Draining, cleaning, and refilling your pond shouldn't mean stopping every few minutes to empty a tank. When sludge and debris build up faster than you can clear them, you need a vacuum that keeps working while you work. This continuous-flow vacuum pulls in dirty water and pumps it straight out to waste, so the job never pauses. Reach over 60 feet of working distance and send wastewater up hills, out windows, or across the yard without lifting a single bucket.

• Continuous Operation: Balanced dual-motor design lets you vacuum and discharge water at the same time, so you never stop to empty a tank.
• Suction Power: Pulls up to 1500 gph into a 13 gallon holding tank, with a pre-filter bag catching large solids first.
• Discharge Pump: A 1 HP sludge pump forces dirty water out under pressure, lifting it up to 18 feet in elevation.
• Working Distance: 32 ft of exhaust hose plus 26 ft of suction hose gives you over 60 feet of total reach, extendable further with an optional secondary exhaust hose.
• Extension Pipe: A 6 foot plastic extension pipe adds control and reach during large cleanouts.
• Included Nozzles: Squeegee, Crevice, Transparent, and Round Brush heads let you match the tool to the surface.
• Versatile Use: Handles pond cleanouts, filter tank cleanouts, basement floods, and household carpet floods.
• Replacement Parts: Genuine parts, including foam, hoses, wheels, and casters, are available to keep the unit running long term.

Continuous Suction That Never Stops to Empty

The heart of this machine is its balanced dual-motor design. The suction motor draws water in while a separate discharge motor pushes it out, and both are matched in flow rate so your vacuum job runs without interruption.

• Suction motor vacuums up to 1500 gph
• Debris drops into the 13 gallon holding tank
• Large solids are caught by a pre-filter bag before the water moves on
• No stopping to dump the tank between passes

You keep vacuuming steadily instead of fighting a stop-start cycle.

How the Water Discharge System Works

Once dirty water enters the tank, the internal 1 HP sludge pump takes over. It forces the used water out under pressure and lifts it up to 18 feet in elevation, so you can send waste wherever it needs to go.

• 32 ft of exhaust hose carries wastewater to any elevation up to 18 feet high
• For best performance, a suggested discharge height of less than 3.5 ft (1.1 M) keeps the water moving freely
• Add an optional secondary exhaust hose onto the end of the discharge hose for an extra 32 ft when you need more reach
• Total working distance is over 60 feet

Let the pump fully drain the discharge hose before shutting the motor off to keep the system clear for the next job.

Reach Every Corner With the Matala Power-Cyclone Vacuum

Handling a large pond means covering distance, and this setup gives you plenty of it. A 6 foot plastic extension pipe pairs with 26 feet of suction hose for easy control across even your biggest cleanouts.

Four vacuum heads are included so you can match the tool to the surface:

• Squeegee nozzle
• Crevice nozzle
• Transparent nozzle
• Round Brush nozzle

More Than a Pond Tool With the Matala Power-Cyclone Pond Vac

This isn't only a pond tool. The same power that clears sludge from your water feature tackles wet messes around the house too. Put it to work on:

• Pond cleanouts
• Filter tank cleanouts
• Basement floods
• Household carpet floods

One machine handles a wide range of cleanup tasks, giving you real value beyond the pond.

Product Specs