Matala Pond Vac II Vacuum 2 HP MuckBuster 4.5 Gallon Sludge Cleaner
Found It for the Same Price or Less?
Contact us and we'll beat it. Guaranteed!
Contact us and we'll beat it. Guaranteed!
Tired of watching sludge, leaves, and debris pile up at the bottom of your pond? The Matala Pond Vac II pulls that muck straight out with a 2 H.P. motor that tested four times more powerful than the competition. Point it, let it fill, and let it drain. Your small pond gets clean without the back-breaking scooping.
Built around a 2 H.P. motor with the highest quality German manufactured components, this vacuum delivers real pulling power where you need it. Suction tests came in four times more powerful than competing units, with a suction lift of 5' above water.
That means you can pull heavy sludge and debris up and out, even from ponds set below your working position.
Also known as the MuckBuster, this vacuum uses a single-chamber suction system. Here is the cycle:
This on and off rhythm is best suited to small applications, and it does ask for a little patience while each cycle completes. The payoff is steady, hands-off cleaning.
This kit arrives ready to work. Inside you get:
Not all debris is the same size, so the adjustable floor nozzles let you dial in the pickup you need. Choose settings for particle sizes of 1/10", 1/5", and 3/8" to match fine silt, larger leaves, or coarser waste.
With 5 extension tubes, you can also adjust your working length to reach across the pond floor without stepping into the water.
The 8 ft discharge hose comes with an integrated blocking flap, so waste water flows out cleanly during the gravity drain phase. Direct the discharge to your garden bed or drainage area and let physics do the work.
The included sludge collection bag captures solid muck for simple disposal, keeping the mess contained from start to finish.
| Spec | Value |
|---|---|
| Brand | Matala |
| Model | Pond Vac II |
| SKU | PV II |
| UPC | 4712765138008 |
| Motor | 2 HP |
| Container Capacity | 4.5 Gallon |
| Wattage | 1400 watts |
| Voltage | 120V |
| Cable Length | 16 ft |
| Suction Lift | 5' above water |
| Suction Hose | 16 ft |
| Discharge Hose | 8 ft with integrated blocking flap |
| Extension Tubes | 5 |
| Nozzle Particle Sizes | 1/10", 1/5", 3/8" |
| Fill Time | 20 to 40 seconds |
| Discharge Time | 20 to 30 seconds |