GCTek AquaBead X2 Double Valve Bead Filter for Koi Ponds

Double the Flow With the GCTek AquaBead X2 Pond Filter

Tired of choking your pond's flow with undersized valves and narrow pathways? When you run twin pumps, a standard filter forces everything through openings that fight against your equipment. The AquaBead X2 answers that with fully doubled valves and internals, keeping every pump's water pathway open and free. You get the flow potential your modern koi pond pumps were built to deliver, and you spend less doing it than you would installing two separate filters.

• Doubled Design: Valves and internals are doubled so twin pumps never get squeezed through narrow openings.
• Minimum Pathway: No water path narrows below a 2" opening per pump.
• Cost Savings: Costs less than buying and installing two separate filters.
• Build Quality: Shares the same construction integrity as the AquaBead and AlphaONE filters.
• Pump Compatibility: Engineered to match the flow demands of modern koi pond pumps.
• Valve Options: Available with Multiport, double multiport, or LH valve configurations depending on model.
• Tank Sizes: Offered in 6 cu. ft. (30" diameter) or 10 cu. ft. (36" diameter) tanks.

Everything Doubled Except the Price

The whole point of this filter is right in the design. Every valve and every internal component is double that of a regular filter, so your pumps never get squeezed.

• No water pathway ever narrows below a 2" opening for either pump
• Doubled valves and internals maximize the flow potential of each pump
• Costs less than installing two individual filters side by side

You get the capacity of a dual setup in one tank, which means fewer connections to plumb and less money out of pocket.

Built for Modern Pumps in the GCTek AquaBead X2 Filter

This filter carries the same build integrity as the AquaBead and AlphaONE filters. It was engineered to match the demands of today's modern koi pond pumps, pulling the most flow and efficiency out of every gallon they push.

If your pumps are working harder than your old filter can handle, this design opens the path so nothing gets held back.

Valve Configurations That Fit Your GCTek AquaBead X2 Koi Pond Filter

Different models pair different valve setups so you can match the filter to your plumbing.

• AquaBead X2 6.0: one Multiport valve and one set of 2"/2.5" valves
• AquaBead X2 10.0: one Multiport valve and one set of 2"/2.5" 2 way valves
• AquaBead X2 Classic: double multiport valves
• AquaBead X2 LH6.0: one LH valve and one set of 2"/2.5" two way valves
• AquaBead X2 LH10.0: one LH valve and one set of 2"/2.5" two way valves

Tank Sizes and Media Capacity of the GCTek AquaBead X2 Bead Filter

Pick the size that suits your pond volume and pump output.

• 6.0 and LH6.0: 6 cu. ft. capacity in a 30" diameter tank
• 10.0 and LH10.0: 10 cu. ft. capacity in a 36" diameter tank
• Classic: 10 cu. ft. capacity in a 36" diameter tank

Larger tanks hold more bead media, giving bigger ponds and stronger pumps the room they need to filter cleanly.

Product Specs

Product Attachments

GCTek AquaBead X2 Manual